Archive for the ‘Makita Circular Saws’ Category
Author: Makita Cordless Tools
Makita 4100NHX1 4-3/8″ Masonry Saw w/ 1 Free Diamond Blade
Makita 4100NHX1 4-3/8″ Masonry Saw w/ 1 Free Diamond Blade. Makita built motor delivers 12 AMPs for various cutting applications. Increased 1-3/8″ cutting capacity. More compact design at only 8-5/8″ long and weighs only 5.9 lbs. for less operator fatigue. High power to weight with 13,000 RPM. Easy to adjust depth gauge for precision cutting. Lock-off button helps prevent accidental starts. Flat rear side of motor housing allows for easy blade changes
In Stock: YES
Condition: New
Warranty: 1-Year Makita
Posted in Makita Circular Saws
Author: Makita Cordless Tools
Makita 5007MGX1 7-1/4″ Magnesium Circular Saw with LED Light & 10 Free Saw Blades
Makita 5007MGX1 7-1/4″ Magnesium Circular Saw with LED Light & 10 Free Saw Blades. Magnesium components create lightweight saws that are well-balanced and jobsite tough. Powerful 15 AMP Motor delivers enough power to cut through the densest lumber. Large Cutting and bevel capacities with positive stops at 22.5� and 45�. Built in LED light and dust blower enhance the line of cut for increased accuracy. Easy to read numbers and ruler markings on base and depth guide allow user to measure and follow cuts accurately. Reinforced power cord withstands jobsite abuse. Blade wrench is attached to saw for fast and convenient blade changing. Make quick, one-handed adjustments using the large, rubberized levers. Quickly change from 0� to 45� and back using the positive stops that are connected to the easy grip levers. Ideal for framers, roofers and carpenters for cutting dimensional, engineered and wet lumber, ripping panels and plunge cutting
In Stock: YES
Condition: New
Warranty: 1-Year Makita
Posted in Makita Circular Saws
Author: Makita Cordless Tools
Makita 5007FK-R Factory-Reconditioned 7-1/4″ Circular Saw Kit w/ Light & Case
Makita 5007FK-R Factory-Reconditioned 7-1/4″ Circular Saw Kit w/ Light & Case. LED light switch operates independently from the trigger. Flat motor housing design increases stability when changing blades. Powerful 15 Amp motor for a high power-to-weight ratio. Heavy gauge aluminum wraparound base. Ball bearing construction for a longer tool life. Includes tool case. Conveniently located shaft lock for easy blade replacement. Technologically advanced centrifugal fan and baffle for efficient cooling of the motor. AC/DC switch allows for use with alternative power sources. Thin kerf carbide tipped blade. Double insulated. Includes tool case
In Stock: YES
Condition: Refurbished
Warranty: 1-Year Makita
Posted in Makita Circular Saws
Author: Makita Cordless Tools
Makita SP6000K1 6-1/2″ Plunge Circular Saw with 55″ Guide Rail
Makita SP6000K1 6-1/2″ Plunge Circular Saw with 55″ Guide Rail. Powerful 12 AMP motor for continuous operation. Electronic soft start feature for smooth start-ups. Large cutting capacity (2-3/16″ at 90 degrees and 1-9/16″ at 45 degrees). Smooth and convenient plunge release lever for operator comfort. Easy to set depth adjustment with large scale. Bevel capability (-1 degrees to 48 degrees) with positive stops at 22.5 degrees and 45 degrees. Magnesium components deliver a well balanced and lightweight saw at only 9.1 lbs. Dual front and rear bevel supports provide additional rigidity for precise and accurate bevel cuts. Precise bevel cutting as the position of the blade enters the material on the same cutting line whether cutting straight or bevel. Close to the wall cutting (11/16″) for expanded cutting applications. Locking lever holds the blade in position so that the wrench can be inserted through the hole in the blade case for easier blade installation Blade wrench attaches to the saw for fast and convenient blade changes. Electric brake for improved productivity. Rubberized handles for added comfort. Large 1-7/16″ rear dust port directs material away from the operator and easily connects to a vacuum system. Includes a premium 48 tooth carbide-tipped blade. The 55″ guide rail system interacts with the saw base to provide smooth perfect dead-on straight or bevel cutting. Built-in depth stop
In Stock: YES
Condition: New
Warranty: 1-Year Makita
Posted in Makita Circular Saws
Author: Makita Cordless Tools
Makita 5620DWD-R Factory-Reconditioned 18V Cordless 6-1/2″ Circular Saw Kit (Blade-Left)
Makita 5620DWD-R Factory-Reconditioned 18V Cordless 6-1/2″ Circular Saw Kit (Blade-Left). Powerful two-piece “D-35″ motor with replaceable armature for longer life. Large aluminum wraparound base. 50° bevel capacity. Externally accessible brushes
In Stock: YES
Condition: Refurbished
Warranty: 1-Year Makita
Posted in Makita Circular Saws
Author: Makita Cordless Tools
Makita BSS611Z 18V Cordless LXT Lithium-Ion 6-1/2″ Circular Saw (Tool Only)
Makita BSS611Z 18V Cordless LXT Lithium-Ion 6-1/2″ Circular Saw (Tool Only). Makita-built D35 high torque motor delivers maximum power for cutting 2X material at 45° with 50° maximum capacity. Compact design at only 13-5/8″ length and weighs only 6.9 lbs. for less operator fatigue. Ergonomic shape fits like a glove with even pressure and easy control. Heavy gauge, precision machined base for smooth, accurate cutting and added durability. Two-piece armature and field along with externally accessible brushes for serviceability and longer motor life
In Stock: YES
Condition: New
Warranty: 1-Year Makita
Posted in Makita Circular Saws
Author: Makita Cordless Tools
Makita BSS501-R Factory-Reconditioned 18V Cordless LXT Lithium-Ion 5-3/8″ Circular Trim Saw Kit
Makita BSS501-R Factory-Reconditioned 18V Cordless LXT Lithium-Ion 5-3/8″ Circular Trim Saw Kit. Compact and lightweight design delivers power that is easy to control. 2″ maximum cutting capacity enables cutting a 2″ x 4″ in one pass. Built-in L.E.D. lights for more illuminated work. Built-in dust blower enhances line of sight and keeps work piece clean. Makita’s Rapid Optimum Charger (DC18RA) chargers faster to allow less down time and more productivity. Ergonomically designed handle with soft grip provides better fit and even more control. Blade wrench strays away in the saw for fast and convenient blade changing. LXT Lithium-Ion provides longer run time, 5x lower self-discharge (for use any time) and 16 firm holding contact terminals (for constant high power). 25-minute Rapid Optimum Charger communicates with the battery throughout the charging process using the built-in chip in the battery and built-in CPU chip in the charger; actively controls current, voltage and temperature to optimize battery life
In Stock: YES
Condition: Refurbished
Warranty: 3-Year Makita
Posted in Makita Circular Saws
Author: Makita Cordless Tools
Makita SP6000K 6-1/2″ Plunge Circular Saw
Makita SP6000K 6-1/2″ Plunge Circular Saw. Precision accurate cutting delivers a splinter-free mirror finish. Electronic speed control maintains constant speed under load for smooth cutting. Variable speed dial control (2,000 to 5,200 RPM) for optimum performance in a variety of materials. Built-in current limiter helps prevent motor burnout. Powerful 12 AMP motor for continuous operation. Electronic soft start feature for smooth start-ups. Large cutting capacity (2-3/16″ at 90° and 1-9/16″ at 45°). Easy to set depth adjustment with large scale. Smooth and convenient plunge release lever for operator comfort. Bevel capacity (-1° to 48°) with positive stops at 22.5° and 45°. Magnesium components deliver a well balanced and lightweight saw at only 9.1 lbs. Dual front and bevel supports provide additional rigidity for precise and accurate bevel cuts. Precise bevel cutting as the position of the blade enters the material on the same cutting line whether cutting straight or bevel. Close to the wall cutting (11/16″) for expanded cutting applications. Locking lever holds the blade in position so that the wrench can be inserted through the hole in the blade case for easier blade installation. Blade wrench attaches to the saw for fast and convenient blade changes. Electric brake for improved productivity. Built-in depth stop allows a preliminary cut of 1/16″ to be performed before the entire material is cut through for clean and splinter-free cutting. Rubberized handles for added convenient. Large 1-7/16″ rear dust port directs material away from the operator and easily connects to a vacuum system. Optional guide rail system (194368-5) interacts with the saw base to provide smooth, perfect and dead-on straight or bevel cuts. Saw base is attachable to other guide rail systems in the market
In Stock: YES
Condition: New
Warranty: 1-Year Makita
Posted in Makita Circular Saws
Author: Makita Cordless Tools
Makita BCS550-R Factory-Reconditioned 18V Cordless LXT Lithium-Ion 5-3/8″ Metal Cutting Saw Kit
Makita BCS550-R Factory-Reconditioned 18V Cordless LXT Lithium-Ion 5-3/8″ Metal Cutting Saw Kit. Cuts Unistrut; all thread, channel, corrugated, conduit, pipe, sheet metal, square tubing, steel and more. Makita built, high torque motor produces 3,400 RPM for faster metal cutting. Compact design at only 12″ length and weighs only 6.4 lbs. for less operator fatigue. Ergonomic shape fits like a glove with even pressure and easy control. LXT Lithium-Ion provides longer run time – 5x lower self-discharge for use any time and 16 firm holding contact terminals for constant high power. Rapid Optimum charger and battery communicates throughout the charging process using the built-in chip in the battery and built-in CPU chip in the charger; uses “Active 3 Control” for current control, thermal control and voltage control. Rapid Optimum charger (25 minutes for 3.0 Ah batteries) has a built-in fan to cool the battery to produce more lifetime work. Built-in LED light illuminates the work area
In Stock: YES
Condition: Refurbished
Warranty: 3-Year Makita
Posted in Makita Circular Saws
Author: Makita Cordless Tools
Makita 5007NHK-R Factory-Reconditioned 7-1/4″ Circular Saw (Blade-Right) w/ Case
Makita 5007NHK-R Factory-Reconditioned 7-1/4″ Circular Saw (Blade-Right) w/ Case. Heavy gauge aluminum wraparound base. Well balanced design for easy handling and performance. Bevels cuts up to 50° with a positive stop at 45°. Ball and needle bearing construction for long tool life. Shaft lock for easy blade replacement. Includes tool case. Rubberized lever grips for comfortable adjustments. Flat design motor housing for easy blade changes. Technologically advanced centrifugal fan and baffle for efficient cooling of the motor. Precision cut, heat treated gears for maximum power output and smoother, quieter operation. 24 tooth carbide tipped blade with BlueMaks II coating for reduced pitch build-up. Includes tool case
In Stock: YES
Condition: Refurbished
Warranty: 1-Year Makita
Posted in Makita Circular Saws